You are here: Installation Guide > Physical Interface > Physical Description
FLIR

Blackfly®S

BFS-PGE-16S2

 

Blackfly S Cased Physical Description

 
 
 
  1. Lens holder
    See Lens Mounting
  2. Glass/IR filter system
    See Dust ProtectionInfrared Cut-Off Filters
  3. M2x2.5 mounting holes
    See Mounting Your Blackfly S
  4. General purpose I/O connector
    See General Purpose Input/Output (GPIO)
  1. Status LED
    See Status Indicator LED
  2. Interface connector
    See Interface Connector
  3. M2x2.5 mounting holes
  4. M3x2.5 mounting holes
    See Mounting Your Blackfly S
  5. Camera label
    Contains camera information such as model name, serial number and required compliance.

 

3/14/2021
© 2015-2021 FLIR® Integrated Imaging Solutions Inc.
All rights reserved.
Legal
| Contact Support

Blackfly®S BFS-PGE-16S2
Camera Reference