You are here: Installation Guide > Physical Interface > Physical Description
FLIR

Blackfly®S

BFS-U3-19S4

 

Blackfly S Cased Physical Description

 
 
 
  1. Lens holder
    See Lens Mounting
  2. Glass/IR filter system
    See Dust ProtectionInfrared Cut-Off Filters
  3. M2x2.5 mounting holes
    See Mounting
  4. General purpose I/O connector
    See General Purpose Input/Output (GPIO)
  1. Status LED
    See Status Indicator LED
  2. Interface connector
    See Interface Connector
  3. M2x2.5 mounting holes
  4. M3x2.5 mounting holes
    See Mounting
  5. Camera label
    Contains camera information such as model name, serial number and required compliance.

 

1/23/2020
© 2015-2020 FLIR® Integrated Imaging Solutions Inc.
All rights reserved.
Legal | Contact Support

Blackfly®S BFS-U3-19S4
Camera Reference