You are here: Installation Guide > Physical Interface > Mounting
FLIR

Blackfly®S

BFS-U3-31S4-BD

 

Mounting

Using the Mounting Holes

Four mounting points are provided using M2 through holes. For precise alignment, index off the image sensor (U16 Pin in the drawing below). When designing a mounting bracket, respect the Keepout Layer.

Board-level Diagram

 

2/11/2020
© 2015-2020 FLIR® Integrated Imaging Solutions Inc.
All rights reserved.
Legal
| Contact Support

Blackfly®S BFS-U3-31S4-BD
Camera Reference