You are here: Installation Guide > Physical Interface > Mounting
FLIR

Blackfly®S

BFS-U3-50S5-BD2

 

Mounting

Using the Mounting Holes

Four mounting points are provided using M2 through holes. Additionally, an indexing key is available on the imager board. When designing a mounting bracket, respect the Keepout Layer.

Board-level Diagram

 

6/28/2018
© 2015-2018 FLIR® Integrated Imaging Solutions Inc.
All rights reserved.
Legal
| Contact Support

Blackfly®S BFS-U3-50S5-BD2
Camera Reference

FLIR Camera and API References