You are here: Installation Guide > Configuring Firefly Setup FFY-U3-16S2C-DL
FLIR

Firefly®

FFY-U3-16S2C-DL

 

Configuring Firefly Setup

After successful installation of your camera and interface card, you can make changes to the setup. Use the tools described below to change the driver for your interface card.

For information on updating your camera's firmware post installation, see Camera Firmware.

 

5/8/2020
© 2015-2020 FLIR® Integrated Imaging Solutions Inc.
All rights reserved.
Legal
| Contact Support

Firefly® FFY-U3-16S2C-DL
Camera Reference