You are here: Installation Guide > Configuring Blackfly S Setup BFS-GE-16S2-BD2
FLIR

Blackfly®S

BFS-GE-16S2-BD2

 

Configuring Blackfly S Setup

After successful installation of your camera and interface card, you can make changes to the setup. Use the tools described below to change the IP Address or the driver for your interface card.

For information on updating your camera's firmware post installation, see Camera Firmware.

 

8/13/2018
© 2015-2018 FLIR® Integrated Imaging Solutions Inc.
All rights reserved.
Legal
| Contact Support

Blackfly®S BFS-GE-16S2-BD2
Camera Reference

FLIR Camera and API References